My Journal
My Journal

Category : CISCO Switches

Cisco MDS- Clear all configurationon switch

The steps below are the process of clearing all zoning configurations on an CISCO switch. Note: Ensure this is a standalone switch; if it is connected to other switches in the fabric then you may potentially affect the entire fabric. 1. Firstly determine the names of the ac...

Continue reading

Cisco Switch: Reset the Management port

Reset the IP manageability please follow the steps below: 1. Set up a null modem (RS-232) cable to the maint port on the back of the switch. 2. Using Hyperterminal, make a connection using the COM port with the following settings: a. Bits per second 57600 b. Data Bits 8 c....

Continue reading